Both ANDRA Rollcage Specifications have been updated by ANDRA Technical and they can be found here:

The updates, which are effective from 1st December 2018, present the following rule changes;

  1. To allow the use of Four Point Rollcages in 1930s style Coupes and Hot Rods etc.
  2. To allow a +/- 10° lean in the Main Hoop, (as per CAMS Schedule J).

There are some other minor changes to existing requirements, as well as adding further clarification to other existing requirements which were being questioned by some rollcage fabricators.
As always the changes are clearly highlighted with different coloured text throughout the documents.

If you have any questions regarding the information presented in either specification please contact ANDRA Technical ontechnical@andra.com.au or 08 8271 5355.

Thanks, Scott
ANDRA Technical Officer